Introduction to Electric Pulse Gloves
Electric pulse gloves represent a revolutionary advancement in non-lethal defense technology. These innovative devices integrate the immobilizing power of stun guns into wearable glove form, providing law enforcement and security personnel with an effective tool for subduing assailants without causing permanent harm.
Key Features and Benefits
Instant immobilization: Renders attackers defenseless within 2-3 seconds
Safe voltage levels: Uses low-voltage pulses that don’t cause bodily harm
Dual functionality: Combines defensive shock capability with physical protection
Versatile applications: Effective against human assailants and aggressive animals
Carbon fiber reinforcement: Protects wearer from blunt force attacks
How Electric Pulse Gloves Work
Neuro-Muscular Disruption Technology
When the glove’s conductive surface makes contact:
Delivers 300 pulses per minute to subcutaneous nerve fibers
Causes immediate muscle contraction and spasms
Temporarily disrupts brain-to-body motor coordination
Creates a 3-5 second window for suspect apprehension
Protective Design Elements
Carbon fiber assault shells at joints for impact resistance
Ergonomic fit for full hand mobility
Quick-release mechanism for emergency situations
Recommended Usage Protocols
Target Areas for Maximum Effectiveness
Forearms and wrists (primary)
Legs and joints (secondary)
Restricted Areas
Head and face
Throat region
Groin area
(Use only in life-threatening situations)
Industry Applications
Law Enforcement
Suspect apprehension
Riot control
Prison security
Security Personnel
VIP protection
Event security
Mental health intervention
Civilian Defense
Personal protection
Animal control
Security training
Technical Specifications
| Feature | Specification |
|---|---|
| Pulse Rate | 300 pulses/minute |
| Voltage | Low-voltage (non-harmful) |
| Activation | Skin contact required |
| Materials | Carbon fiber reinforced |
| Weight | <500g per glove |
Why Choose Hinaray E-Gloves?
Trusted by professionals worldwide
Extensively tested for safety and reliability
Complements existing use-of-force equipment
Enhances defensive tactics training programs
Frequently Asked Questions
Q: How long do the effects last?
A: Typically 3-5 seconds after contact ceases.
Q: Is special training required?
A: Basic operational training recommended for optimal effectiveness.
Q: Can it cause permanent injury?
A: When used properly on approved target areas, no permanent damage occurs.
Q: What maintenance is required?
A: Regular battery checks and conductive surface cleaning.
SPECS
- Power on: long press for 2-3 seconds
- Power off the long press for 2-3 seconds
- Continuous standby time: 8 hours
- Continuous working time: 2 hours
- Charging time: 2 hours
- Working voltage: 3.7v
- Working temperature: -10~50 degree
- Net weight:260-650g/pair
Application Fields
- Armed police
- SWAT
- Drug police
- Plainclothes officer
- Air police and all kinds of arresting action like anti-terrorist
PN: HN-90-A1
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 65% goat skin + 35% polyester fiber |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 210mm ±3mm |
| Weight | 272g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Finger link belt, Velcro wrist, metal snap ring, embossment pad (≥2mm) |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-A2
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 95% goat skin + 5% kevlar |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 225mm ±3mm |
| Weight | 308g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-B1
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 70% goat skin + 30% polyester fiber |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 215mm ±3mm |
| Weight | 279g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Finger link belt, Velcro wrist, metal snap ring, embossment pad (≥2mm) |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-B2
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 95% goat skin + 5% kevlar |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 225mm ±3mm |
| Weight | 315g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
HN-90-B3
| Parameter | Details |
|---|---|
| Color | Black |
| Material | Cow leather 52% + Kevlar 40% + Goat leather 8% |
| Leather Thickness | 2 mm |
| Lining Material | 100% polyester fiber |
| Glove Length | 275 mm ±3 mm |
| Weight | 357 g ±5 g |
| Palm Width | 340 mm ±3 mm |
| Protection Structure | 9 carbon fiber protective shells on knuckles (back of hand); defends against common attacks and enables strong punch capability |
| Wrist Design | Velcro strap for size adjustment and secure fastening |
| Metal Snap Ring | Metal ring on the side of each glove allows right and left gloves to be locked together after use |
| Electrode Blocks | 4 blocks per palm |
| Electrode Area | No less than 40 cm² per palm |
| Power Switch | Located on the back of the glove near the wrist; long press to turn on/off |
| Switch Size | ≤ 25 mm (diameter) |
| Indicator Light | Built-in LED indicator inside the switch to show power status |
| Water & Cut Resistance | – Waterproof both inside and outside |
PN: HN-90-C1
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 95% goat skin + 5% kevlar |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 225mm ±3mm |
| Weight | 320g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-C2
| Attribute | Value |
|---|---|
| Color | Camouflage |
| Material | 70% goat skin + 30% polyester fiber |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 225mm ±3mm |
| Weight | 320g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-D1
| Attribute | Value |
|---|---|
| Color | Camouflage |
| Material | 95% goat skin + 5% kevlar |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 225mm ±3mm |
| Weight | 320g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-D2
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 100% goat skin |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 230mm ±3mm |
| Weight | 329g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-E1
| Attribute | Value |
|---|---|
| Color | Camouflage |
| Material | 100% goat skin |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 230mm ±3mm |
| Weight | 329g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |
PN: HN-90-E2
| Attribute | Value |
|---|---|
| Color | Black |
| Material | 70% goat skin + 30% polyester fiber |
| Thickness of leather | 2mm |
| Lining material | 100% polyester fiber |
| Length | 230mm ±3mm |
| Weight | 329g ±5g |
| Palm size | 340mm ±3mm |
| Special features | Carbon fiber knuckle shell (9 pts), finger link belt, Velcro, metal snap ring |
| Electrodes | 4 electrode blocks at palm (≥40 cm²) |
| Switch | Back side near wrist, long press to power on/off, ≤25mm diameter |
| Indicator light | Yes |
| Control module | Back of glove, 75×45×15mm, fixed by two lines |
| DC input | 4.2V / 500mA |
| Battery capacity | 600mAh |
| Charge time | 6 hours |
| Stand-by time | 8 hours |
| Continuous working time | ≥2 hours |
| Output | 240–280V pulse, non-lethal, causes spasm |
| Subdue time | ≤3 seconds |
| Storage temp. | -20 to +55℃ |
| Operating temp. | -10 to +50℃ |








