Electronic Riot Shield

In situations when armed resistance is inevitable, special forces and tactical operators must be equipped with the proper body armor to neutralize the threat. Ballistic shields are mostly utilized in these high-stakes situations, particularly during high-risk raids, riots, active shooters, and other risky events.

The Hinaray Anti-riot Shield offers military and law enforcement officers a non-lethal approach to crowd control. In riot situations, they offer protection to Police and Security personnel. The shield is constructed from polycarbonate that is both lightweight and shatterproof. It provides exceptional resistance to impact, force, stones, iron marbles, and birdshot.

When the shield is activated, an electric pulse connects the electronic strips.

This makes it challenging for rioters to look directly at the shield when the glaring light function is activated. When the shock function is activated, the rioters cannot contact or push the surface of the shield.

No harm is done to those who are shocked by E-shield; the pulse only causes a bodily spasm. In such a circumstance, a person would be unable to move since his muscle and fibrous tissue had shrunk.

The following products are available from Hinaray in the E-Shield category:

  1. Tactile Shields
  2. Ballistic Shields

Whether you are directing a crowd, conducting a tactical simulation, or operating in the field, ballistic and riot shields are your primary line of defense. Ballistic protection shields are used by tactical teams to deflect gunshots and other projectiles intended at the carrier. Specially constructed riot shields are available to law enforcement officers for crowd control scenarios

Equip your law enforcement and military personnel with a Hinaray electronic riot shield that provides sturdy, non-ballistic protection during riots and crowd control. It has numerous patent-protected innovations that set it apart from other shields on the market. Key features  include:

E-Fork Product List

  1. Auto-Lock E-Fork(wolftooth)
  2. Auto-Lock E-Fork
  3. Auto-Lock Fork with Pepper Spray

SPECS

Features

PN

Detail Description

Picture

HN-GD-01

  • Material:High strength PC
  • Weight:3990g±5g
  • Shield thickness:5mm
  • Buffer layer thickness:18mm
  • Shield diameter:580mm±5mm
  • Battery capacity:5000mAh
  • Charge time: 8 hours
  • Operating temperature: -10/+50℃
  • Storage temperature: -10/+50℃
  • Shield body is light and strong,high impact resistance.
  • Wave length of the strong glaring light is 532nm, power of the light is 100W.
  • There are 100pcs high light green LEDs form the matrix.
  • The electronic strips are with electric pulse when the shield is turned on.
  • The rioters can’t look straight to the shield when the glaring light function is started.The rioters can’t touch or push the surface of the shiled when the shock function is started.
  • No harm to the people who is shocked by E-shield,the pulse just create physical spasm of body, a person couldn’t move his body when his muscle and fibrous tissue shrink.
  • The continuous work time is at least 30 minutes for glaring light,and 100 hours for electric pulse.
  • Electric pulse switch and LED lights switch are all located at back of shield(Red one is the electric pulse switch,blue one is LED lights switch).
  • There is indicator light inside the switch to indicate on/off.
  • There are metal conductive stripe on the surface of the shield.
  • There are handle and adjustable band at the back of shield.
  • The handle is made of high strength plastic and the bandage is made of high 1000D nylon fabric.
  • The length of band can be adjusted to make sure tightly wear.
  • There is a cooling fan at the back of the shield to release the heat of shield during operating.

HN-SG-01

  • Material:Aviation AL material
  • Weight:5230g±5g
  • Shield thickness:2.5mm
  • Buffer layer thickness:24mm
  • Height:950mm±3mm
  • Wide:492mm±3mm
  • Battery capacity:5000mAh
  • Charge time: 8 hours
  • Operating temperature: -10/+50℃
  • Storage temperature: -10/+50℃
  • The continuous work time is at least 30 minutes for glaring light,and 120 minutes for alarm.
  • Shield body is light and strong,high impact resistance.
  • Wave length of the strong glaring light is 532nm, power of the light is 100W.
  • There are 100pcs high light green LEDs form the matrix.
  • The rioters can’t look straight to the shield when the glaring light function is started.
  • Alarm dispel uses high intensity noise waves.
  • When press the alarm switch,it will create a sharp sound with 130db,the crowd cannot get close away from 2m.
  • Alarm switch and LED lights switch are all located at the back side of shield(Red one is the alarm switch,blue one is LED lights switch).
  • There are handle and adjustable band at the back of shield.
  • There is a cooling fan at the back of the shield to release the heat of shield during operating.
  • The handle is made of high strength plastic and the bandage is made of high 1000D nylon fabric.
  • The length of band can be adjusted to make sure tightly wear.

Request For More Information